/*
 * @(#)Writer.java	1.29 05/11/17
 *
 * Copyright 2006 Sun Microsystems, Inc. All rights reserved.
 * SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
 */

package java.io;


/**
 * Abstract class for writing to character streams.  The only methods that a
 * subclass must implement are write(char[], int, int), flush(), and close().
 * Most subclasses, however, will override some of the methods defined here in
 * order to provide higher efficiency, additional functionality, or both.
 *
 * @see Writer
 * @see   BufferedWriter
 * @see   CharArrayWriter
 * @see   FilterWriter
 * @see   OutputStreamWriter
 * @see     FileWriter
 * @see   PipedWriter
 * @see   PrintWriter
 * @see   StringWriter
 * @see Reader
 *
 * @version 	1.29, 05/11/17
 * @author	Mark Reinhold
 * @since	JDK1.1
 */

public abstract class Writer implements Appendable, Closeable, Flushable {

    /**
     * Temporary buffer used to hold writes of strings and single characters
     */
    private char[] writeBuffer;

    /**
     * Size of writeBuffer, must be >= 1
     */
    private final int writeBufferSize = 1024;

    /**
     * The object used to synchronize operations on this stream.  For
     * efficiency, a character-stream object may use an object other than
     * itself to protect critical sections.  A subclass should therefore use
     * the object in this field rather than <tt>this</tt> or a synchronized
     * method.
     */
    protected Object lock;

    /**
     * Creates a new character-stream writer whose critical sections will
     * synchronize on the writer itself.
     */
    protected Writer() {
	this.lock = this;
    }

    /**
     * Creates a new character-stream writer whose critical sections will
     * synchronize on the given object.
     *
     * @param  lock
     *         Object to synchronize on
     */
    protected Writer(Object lock) {
	if (lock == null) {
	    throw new NullPointerException();
	}
	this.lock = lock;
    }

    /**
     * Writes a single character.  The character to be written is contained in
     * the 16 low-order bits of the given integer value; the 16 high-order bits
     * are ignored.
     *
     * <p> Subclasses that intend to support efficient single-character output
     * should override this method.
     *
     * @param  c
     *         int specifying a character to be written
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(int c) throws IOException {
	synchronized (lock) {
	    if (writeBuffer == null){
		writeBuffer = new char[writeBufferSize];
	    }
	    writeBuffer[0] = (char) c;
	    write(writeBuffer, 0, 1);
	}
    }

    /**
     * Writes an array of characters.
     *
     * @param  cbuf
     *         Array of characters to be written
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(char cbuf[]) throws IOException {
	write(cbuf, 0, cbuf.length);
    }

    /**
     * Writes a portion of an array of characters.
     *
     * @param  cbuf
     *         Array of characters
     *
     * @param  off
     *         Offset from which to start writing characters
     *
     * @param  len
     *         Number of characters to write
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    abstract public void write(char cbuf[], int off, int len) throws IOException;

    /**
     * Writes a string.
     *
     * @param  str
     *         String to be written
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(String str) throws IOException {
	write(str, 0, str.length());
    }

    /**
     * Writes a portion of a string.
     *
     * @param  str
     *         A String
     *
     * @param  off
     *         Offset from which to start writing characters
     *
     * @param  len
     *         Number of characters to write
     *
     * @throws  IndexOutOfBoundsException
     *          If <tt>off</tt> is negative, or <tt>len</tt> is negative,
     *          or <tt>off+len</tt> is negative or greater than the length
     *          of the given string
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(String str, int off, int len) throws IOException {
	synchronized (lock) {
	    char cbuf[];
	    if (len <= writeBufferSize) {
		if (writeBuffer == null) {
		    writeBuffer = new char[writeBufferSize];
		}
		cbuf = writeBuffer;
	    } else {	// Don't permanently allocate very large buffers.
		cbuf = new char[len];
	    }
	    str.getChars(off, (off + len), cbuf, 0);
	    write(cbuf, 0, len);
	}
    }

    /**
     * Appends the specified character sequence to this writer.
     *
     * <p> An invocation of this method of the form <tt>out.append(csq)</tt>
     * behaves in exactly the same way as the invocation
     *
     * <pre>
     *     out.write(csq.toString()) </pre>
     *
     * <p> Depending on the specification of <tt>toString</tt> for the
     * character sequence <tt>csq</tt>, the entire sequence may not be
     * appended. For instance, invoking the <tt>toString</tt> method of a
     * character buffer will return a subsequence whose content depends upon
     * the buffer's position and limit.
     *
     * @param  csq
     *         The character sequence to append.  If <tt>csq</tt> is
     *         <tt>null</tt>, then the four characters <tt>"null"</tt> are
     *         appended to this writer.
     *
     * @return  This writer
     *
     * @throws  IOException
     *          If an I/O error occurs
     *
     * @since  1.5
     */
    public Writer append(CharSequence csq) throws IOException {
	if (csq == null)
	    write("null");
	else
	    write(csq.toString());
    	return this;
    }

    /**
     * Appends a subsequence of the specified character sequence to this writer.
     * <tt>Appendable</tt>.
     *
     * <p> An invocation of this method of the form <tt>out.append(csq, start,
     * end)</tt> when <tt>csq</tt> is not <tt>null</tt> behaves in exactly the
     * same way as the invocation
     *
     * <pre>
     *     out.write(csq.subSequence(start, end).toString()) </pre>
     *
     * @param  csq
     *         The character sequence from which a subsequence will be
     *         appended.  If <tt>csq</tt> is <tt>null</tt>, then characters
     *         will be appended as if <tt>csq</tt> contained the four
     *         characters <tt>"null"</tt>.
     *
     * @param  start
     *         The index of the first character in the subsequence
     *
     * @param  end
     *         The index of the character following the last character in the
     *         subsequence
     *
     * @return  This writer
     *
     * @throws  IndexOutOfBoundsException
     *          If <tt>start</tt> or <tt>end</tt> are negative, <tt>start</tt>
     *          is greater than <tt>end</tt>, or <tt>end</tt> is greater than
     *          <tt>csq.length()</tt>
     *
     * @throws  IOException
     *          If an I/O error occurs
     *
     * @since  1.5
     */
    public Writer append(CharSequence csq, int start, int end) throws IOException {
	CharSequence cs = (csq == null ? "null" : csq);
	write(cs.subSequence(start, end).toString());
 	return this; 
    }

    /**
     * Appends the specified character to this writer.
     *
     * <p> An invocation of this method of the form <tt>out.append(c)</tt>
     * behaves in exactly the same way as the invocation
     *
     * <pre>
     *     out.write(c) </pre>
     *
     * @param  c
     *         The 16-bit character to append
     *
     * @return  This writer
     *
     * @throws  IOException
     *          If an I/O error occurs
     *
     * @since 1.5
     */
    public Writer append(char c) throws IOException {
	write(c);
	return this;
    }

    /**
     * Flushes the stream.  If the stream has saved any characters from the
     * various write() methods in a buffer, write them immediately to their
     * intended destination.  Then, if that destination is another character or
     * byte stream, flush it.  Thus one flush() invocation will flush all the
     * buffers in a chain of Writers and OutputStreams.
     * 
     * <p> If the intended destination of this stream is an abstraction provided
     * by the underlying operating system, for example a file, then flushing the
     * stream guarantees only that bytes previously written to the stream are
     * passed to the operating system for writing; it does not guarantee that
     * they are actually written to a physical device such as a disk drive.
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    abstract public void flush() throws IOException;

    /**
     * Closes the stream, flushing it first. Once the stream has been closed,
     * further write() or flush() invocations will cause an IOException to be
     * thrown. Closing a previously closed stream has no effect.
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    abstract public void close() throws IOException;

}