/*
 * @(#)XAResource.java	1.7 05/11/17
 *
 * Copyright 2006 Sun Microsystems, Inc. All rights reserved.
 * SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
 */

package javax.transaction.xa;

/** <p>The XAResource interface is a Java mapping of the industry standard 
  * XA interface based on the X/Open CAE Specification (Distributed 
  * Transaction Processing: The XA Specification).
  *
  * <p>The XA interface defines the contract between a Resource Manager 
  * and a Transaction Manager in a distributed transaction processing 
  * (DTP) environment. A JDBC driver or a JMS provider implements 
  * this interface to support the association between a global transaction 
  * and a database or message service connection.
  *
  * <p>The XAResource interface can be supported by any transactional 
  * resource that is intended to be used by application programs in an 
  * environment where transactions are controlled by an external 
  * transaction manager. An example of such a resource is a database 
  * management system. An application may access data through multiple 
  * database connections. Each database connection is enlisted with 
  * the transaction manager as a transactional resource. The transaction 
  * manager obtains an XAResource for each connection participating
  * in a global transaction. The transaction manager uses the 
  * <code>start</code> method 
  * to associate the global transaction with the resource, and it uses the 
  * <code>end</code> method to disassociate the transaction from 
  * the resource. The resource
  * manager is responsible for associating the global transaction to all 
  * work performed on its data between the start and end method invocations.
  *
  * <p>At transaction commit time, the resource managers are informed by 
  * the transaction manager to prepare, commit, or rollback a transaction 
  * according to the two-phase commit protocol.</p>
  * 
  */

public interface XAResource {
    /**	Commits the global transaction specified by xid. 
      *
      * @param xid A global transaction identifier
      *
      * @param onePhase If true, the resource manager should use a one-phase 
      * commit protocol to commit the work done on behalf of xid.
      *
      * @exception XAException An error has occurred. Possible XAExceptions  
      * are XA_HEURHAZ, XA_HEURCOM, XA_HEURRB, XA_HEURMIX, XAER_RMERR, 
      * XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO.
      * 
      * <P>If the resource manager did not commit the transaction and the 
      *  paramether onePhase is set to true, the resource manager may throw  
      *  one of the XA_RB* exceptions. Upon return, the resource manager has 
      *  rolled back the branch's work and has released all held resources.
      */

    void commit(Xid xid, boolean onePhase) throws XAException;
    

    /** Ends the work performed on behalf of a transaction branch.
      * The resource manager disassociates the XA resource from the 
      * transaction branch specified and lets the transaction 
      * complete.
      *
      * <p>If TMSUSPEND is specified in the flags, the transaction branch 
      * is temporarily suspended in an incomplete state. The transaction 
      * context is in a suspended state and must be resumed via the 
      * <code>start</code> method with TMRESUME specified.</p>
      *
      * <p>If TMFAIL is specified, the portion of work has failed. 
      * The resource manager may mark the transaction as rollback-only</p>
      *
      * <p>If TMSUCCESS is specified, the portion of work has completed 
      * successfully.</p>
      * 
      * @param xid A global transaction identifier that is the same as
      * the identifier used previously in the <code>start</code> method.
      * 
      * @param flags One of TMSUCCESS, TMFAIL, or TMSUSPEND.
      *
      * @exception XAException An error has occurred. Possible XAException
      * values are XAER_RMERR, XAER_RMFAILED, XAER_NOTA, XAER_INVAL, 
      * XAER_PROTO, or XA_RB*.
      */
    
    void end(Xid xid, int flags) throws XAException;

    
    /** Tells the resource manager to forget about a heuristically 
      * completed transaction branch.
      *
      * @param xid A global transaction identifier.
      *
      * @exception XAException An error has occurred. Possible exception 
      * values are XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or 
      * XAER_PROTO.
      */
    
    void forget(Xid xid) throws XAException;

    /** Obtains the current transaction timeout value set for this 
      * XAResource instance. If <CODE>XAResource.setTransactionTimeout</CODE> 
      * was not used prior to invoking this method, the return value
      * is the default timeout set for the resource manager; otherwise,
      * the value used in the previous <CODE>setTransactionTimeout</CODE> 
      * call is returned.
      *
      * @return the transaction timeout value in seconds.
      *
      * @exception XAException An error has occurred. Possible exception 
      * values are XAER_RMERR and XAER_RMFAIL.
      */
    int getTransactionTimeout() throws XAException;

    /** This method is called to determine if the resource manager 
      * instance represented by the target object is the same as the 
      * resouce manager instance represented by the parameter <i>xares</i>.
      *
      * @param xares An XAResource object whose resource manager instance 
      *      is to be compared with the resource manager instance of the
      *      target object.
      *
      * @return <i>true</i> if it's the same RM instance; otherwise 
      *       <i>false</i>.
      *
      * @exception XAException An error has occurred. Possible exception 
      * values are XAER_RMERR and XAER_RMFAIL.
      *     
      */
    boolean isSameRM(XAResource xares) throws XAException;

    /** Ask the resource manager to prepare for a transaction commit 
      * of the transaction specified in xid.
      *
      * @param xid A global transaction identifier.
      *
      * @exception XAException An error has occurred. Possible exception
      * values are: XA_RB*, XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, 
      * or XAER_PROTO.
      *
      * @return A value indicating the resource manager's vote on the 
      * outcome of the transaction. The possible values are: XA_RDONLY 
      * or XA_OK. If the resource manager wants to roll back the 
      * transaction, it should do so by raising an appropriate XAException
      * in the prepare method.
      */
    
    int prepare(Xid xid) throws XAException;

    
    /** Obtains a list of prepared transaction branches from a resource 
      * manager. The transaction manager calls this method during recovery 
      * to obtain the list of transaction branches that are currently in 
      * prepared or heuristically completed states.
      *
      * @param flag One of TMSTARTRSCAN, TMENDRSCAN, TMNOFLAGS. TMNOFLAGS 
      * must be used when no other flags are set in the parameter.
      * 
      * @exception XAException An error has occurred. Possible values are
      * XAER_RMERR, XAER_RMFAIL, XAER_INVAL, and XAER_PROTO.
      *
      * @return The resource manager returns zero or more XIDs of the 
      * transaction branches that are currently in a prepared or 
      * heuristically completed state. If an error occurs during the 
      * operation, the resource manager should throw the appropriate 
      * XAException.
      *
      */
    
    Xid[] recover(int flag) throws XAException;

    
    /** Informs the resource manager to roll back work done on behalf 
      * of a transaction branch.
      *
      * @param xid A global transaction identifier.
      *
      * @exception XAException An error has occurred.
      */
    
    void rollback(Xid xid) throws XAException;

    
    /** <P>Sets the current transaction timeout value for this <CODE>XAResource</CODE>
      * instance. Once set, this timeout value is effective until 
      * <code>setTransactionTimeout</code> is invoked again with a different 
      * value. To reset the timeout value to the default value used by the resource 
      * manager, set the value to zero.
      *
      * If the timeout operation is performed successfully, the method returns 
      * <i>true</i>; otherwise <i>false</i>. If a resource manager does not 
      * support explicitly setting the transaction timeout value, this method 
      * returns <i>false</i>.
      *
      * @param seconds The transaction timeout value in seconds.
      *
      * @return <i>true</i> if the transaction timeout value is set successfully; 
      *       otherwise <i>false</i>.
      *
      * @exception XAException An error has occurred. Possible exception values
      * are XAER_RMERR, XAER_RMFAIL, or XAER_INVAL.
      */
    boolean setTransactionTimeout(int seconds) throws XAException;

    
    /** Starts work on behalf of a transaction branch specified in 
      * <code>xid</code>.
      * 
      * If TMJOIN is specified, the start applies to joining a transaction  
      * previously seen by the resource manager. If TMRESUME is specified,
      * the start applies to resuming a suspended transaction specified in the 
      * parameter <code>xid</code>.
      *
      * If neither TMJOIN nor TMRESUME is specified and the transaction 
      * specified by <code>xid</code> has previously been seen by the resource 
      * manager, the resource manager throws the XAException exception with 
      * XAER_DUPID error code.
      *
      * @param xid A global transaction identifier to be associated 
      * with the resource.
      * 
      * @param flags One of TMNOFLAGS, TMJOIN, or TMRESUME.
      *
      * @exception XAException An error has occurred. Possible exceptions
      * are XA_RB*, XAER_RMERR, XAER_RMFAIL, XAER_DUPID, XAER_OUTSIDE, 
      * XAER_NOTA, XAER_INVAL, or XAER_PROTO.
      *
      */
    void start(Xid xid, int flags) throws XAException;

    
    /** 
      * Ends a recovery scan.
      */
    public final static int TMENDRSCAN =   0x00800000;
    
    /** 
      * Disassociates the caller and marks the transaction branch 
      * rollback-only.
      */
    public final static int TMFAIL =       0x20000000;

    /** 
      * Caller is joining existing transaction branch.
      */
    public final static int TMJOIN =       0x00200000;
      
    /** 
      * Use TMNOFLAGS to indicate no flags value is selected.
      */
    public final static int TMNOFLAGS =     0x00000000;

    /** 
      * Caller is using one-phase optimization.
      */
    public final static int TMONEPHASE =   0x40000000; 

    /** 
      * Caller is resuming association with a suspended 
      * transaction branch.
      */
    public final static int TMRESUME =     0x08000000;

    /** 
      * Starts a recovery scan.
      */
    public final static int TMSTARTRSCAN = 0x01000000;
    

    /** 
      * Disassociates caller from a transaction branch.
      */
    public final static int TMSUCCESS =    0x04000000;
    

    /** 
      * Caller is suspending (not ending) its association with 
      * a transaction branch.
      */
    public final static int TMSUSPEND =    0x02000000;
    
    /**
     * The transaction branch has been read-only and has been committed.
     */
    public final static int XA_RDONLY = 0x00000003;

    /**
     * The transaction work has been prepared normally.
     */
    public final static int XA_OK = 0;

}