/*
 * @(#)Graphics2D.java	1.84 05/11/17
 *
 * Copyright 2006 Sun Microsystems, Inc. All rights reserved.
 * SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
 */

package java.awt;

import java.awt.RenderingHints.Key;
import java.awt.geom.AffineTransform;
import java.awt.image.ImageObserver;
import java.awt.image.BufferedImageOp;
import java.awt.image.BufferedImage;
import java.awt.image.RenderedImage;
import java.awt.image.renderable.RenderableImage;
import java.awt.font.GlyphVector;
import java.awt.font.FontRenderContext;
import java.awt.font.TextAttribute;
import java.text.AttributedCharacterIterator;
import java.util.Map;

/**
 * This <code>Graphics2D</code> class extends the
 * {@link Graphics} class to provide more sophisticated
 * control over geometry, coordinate transformations, color management,
 * and text layout.  This is the fundamental class for rendering
 * 2-dimensional shapes, text and images on the  Java(tm) platform.
 * <p>
 * <h2>Coordinate Spaces</h2>
 * All coordinates passed to a <code>Graphics2D</code> object are specified 
 * in a device-independent coordinate system called User Space, which is
 * used by applications.  The <code>Graphics2D</code> object contains
 * an {@link AffineTransform} object as part of its rendering state
 * that defines how to convert coordinates from user space to
 * device-dependent coordinates in Device Space.
 * <p>
 * Coordinates in device space usually refer to individual device pixels
 * and are aligned on the infinitely thin gaps between these pixels.
 * Some <code>Graphics2D</code> objects can be used to capture rendering 
 * operations for storage into a graphics metafile for playback on a
 * concrete device of unknown physical resolution at a later time.  Since
 * the resolution might not be known when the rendering operations are
 * captured, the <code>Graphics2D</code> <code>Transform</code> is set up
 * to transform user coordinates to a virtual device space that
 * approximates the expected resolution of the target device. Further
 * transformations might need to be applied at playback time if the
 * estimate is incorrect.
 * <p>
 * Some of the operations performed by the rendering attribute objects
 * occur in the device space, but all <code>Graphics2D</code> methods take 
 * user space coordinates.
 * <p>
 * Every <code>Graphics2D</code> object is associated with a target that
 * defines where rendering takes place. A
 * {@link GraphicsConfiguration} object defines the characteristics
 * of the rendering target, such as pixel format and resolution.
 * The same rendering target is used throughout the life of a
 * <code>Graphics2D</code> object. 
 * <p>
 * When creating a <code>Graphics2D</code> object,  the 
 * <code>GraphicsConfiguration</code> 
 * specifies the <a name="#deftransform">default transform</a> for
 * the target of the <code>Graphics2D</code> (a 
 * {@link Component} or {@link Image}).  This default transform maps the
 * user space coordinate system to screen and printer device coordinates
 * such that the origin maps to the upper left hand corner of the
 * target region of the device with increasing X coordinates extending
 * to the right and increasing Y coordinates extending downward.
 * The scaling of the default transform is set to identity for those devices 
 * that are close to 72 dpi, such as screen devices.
 * The scaling of the default transform is set to approximately 72 user 
 * space coordinates per square inch for high resolution devices, such as
 * printers.  For image buffers, the default transform is the
 * <code>Identity</code> transform.
 *
 * <h2>Rendering Process</h2>
 * The Rendering Process can be broken down into four phases that are 
 * controlled by the <code>Graphics2D</code> rendering attributes.
 * The renderer can optimize many of these steps, either by caching the
 * results for future calls, by collapsing multiple virtual steps into
 * a single operation, or by recognizing various attributes as common
 * simple cases that can be eliminated by modifying other parts of the
 * operation.
 * <p>
 * The steps in the rendering process are:
 * <ol>
 * <li>
 * Determine what to render.  
 * <li>
 * Constrain the rendering operation to the current <code>Clip</code>.
 * The <code>Clip</code> is specified by a {@link Shape} in user
 * space and is controlled by the program using the various clip
 * manipulation methods of <code>Graphics</code> and
 * <code>Graphics2D</code>.  This <i>user clip</i>
 * is transformed into device space by the current
 * <code>Transform</code> and combined with the
 * <i>device clip</i>, which is defined by the visibility of windows and
 * device extents.  The combination of the user clip and device clip
 * defines the <i>composite clip</i>, which determines the final clipping
 * region.  The user clip is not modified by the rendering
 * system to reflect the resulting composite clip. 
 * <li>
 * Determine what colors to render.
 * <li>
 * Apply the colors to the destination drawing surface using the current
 * {@link Composite} attribute in the <code>Graphics2D</code> context.
 * </ol>
 * <br>
 * The three types of rendering operations, along with details of each 
 * of their particular rendering processes are:
 * <ol>
 * <li>
 * <b><a name="rendershape"><code>Shape</code> operations</a></b>
 * <ol>
 * <li>
 * If the operation is a <code>draw(Shape)</code> operation, then
 * the  {@link Stroke#createStrokedShape(Shape) createStrokedShape} 
 * method on the current {@link Stroke} attribute in the
 * <code>Graphics2D</code> context is used to construct a new
 * <code>Shape</code> object that contains the outline of the specified
 * <code>Shape</code>.
 * <li>
 * The <code>Shape</code> is transformed from user space to device space
 * using the current <code>Transform</code> 
 * in the <code>Graphics2D</code> context.
 * <li>
 * The outline of the <code>Shape</code> is extracted using the 
 * {@link Shape#getPathIterator(AffineTransform) getPathIterator} method of
 * <code>Shape</code>, which returns a
 * {@link java.awt.geom.PathIterator PathIterator}
 * object that iterates along the boundary of the <code>Shape</code>.
 * <li>
 * If the <code>Graphics2D</code> object cannot handle the curved segments
 * that the <code>PathIterator</code> object returns then it can call the 
 * alternate 
 * {@link Shape#getPathIterator(AffineTransform, double) getPathIterator}
 * method of <code>Shape</code>, which flattens the <code>Shape</code>.
 * <li>
 * The current {@link Paint} in the <code>Graphics2D</code> context
 * is queried for a {@link PaintContext}, which specifies the
 * colors to render in device space.
 * </ol>
 * <li>
 * <b><a name=rendertext>Text operations</a></b>
 * <ol>
 * <li>
 * The following steps are used to determine the set of glyphs required
 * to render the indicated <code>String</code>:
 * <ol>
 * <li>
 * If the argument is a <code>String</code>, then the current
 * <code>Font</code> in the <code>Graphics2D</code> context is asked to 
 * convert the Unicode characters in the <code>String</code> into a set of 
 * glyphs for presentation with whatever basic layout and shaping
 * algorithms the font implements.
 * <li>
 * If the argument is an
 * {@link AttributedCharacterIterator},
 * the iterator is asked to convert itself to a
 * {@link java.awt.font.TextLayout TextLayout}
 * using its embedded font attributes. The <code>TextLayout</code>
 * implements more sophisticated glyph layout algorithms that
 * perform Unicode bi-directional layout adjustments automatically
 * for multiple fonts of differing writing directions.
  * <li>
 * If the argument is a
 * {@link GlyphVector}, then the
 * <code>GlyphVector</code> object already contains the appropriate
 * font-specific glyph codes with explicit coordinates for the position of
 * each glyph.
 * </ol>
 * <li>
 * The current <code>Font</code> is queried to obtain outlines for the 
 * indicated glyphs.  These outlines are treated as shapes in user space 
 * relative to the position of each glyph that was determined in step 1.
 * <li>
 * The character outlines are filled as indicated above
 * under <a href="#rendershape"><code>Shape</code> operations</a>.
 * <li>
 * The current <code>Paint</code> is queried for a
 * <code>PaintContext</code>, which specifies
 * the colors to render in device space.
 * </ol>
 * <li>
 * <b><a name= renderingimage><code>Image</code> Operations</a></b>
 * <ol>
 * <li>
 * The region of interest is defined by the bounding box of the source 
 * <code>Image</code>.
 * This bounding box is specified in Image Space, which is the 
 * <code>Image</code> object's local coordinate system. 
 * <li>
 * If an <code>AffineTransform</code> is passed to 
 * {@link #drawImage(java.awt.Image, java.awt.geom.AffineTransform, java.awt.image.ImageObserver) drawImage(Image, AffineTransform, ImageObserver)}, 
 * the <code>AffineTransform</code> is used to transform the bounding
 * box from image space to user space. If no <code>AffineTransform</code> 
 * is supplied, the bounding box is treated as if it is already in user space.
 * <li>
 * The bounding box of the source <code>Image</code> is transformed from user
 * space into device space using the current <code>Transform</code>.
 * Note that the result of transforming the bounding box does not
 * necessarily result in a rectangular region in device space.
 * <li>
 * The <code>Image</code> object determines what colors to render, 
 * sampled according to the source to destination
 * coordinate mapping specified by the current <code>Transform</code> and the
 * optional image transform.
 * </ol>
 * </ol>
 *
 * <h2>Default Rendering Attributes</h2>
 * The default values for the <code>Graphics2D</code> rendering attributes are:
 * <dl compact>
 * <dt><i><code>Paint</code></i>
 * <dd>The color of the <code>Component</code>.
 * <dt><i><code>Font</code></i>
 * <dd>The <code>Font</code> of the <code>Component</code>.
 * <dt><i><code>Stroke</code></i>
 * <dd>A square pen with a linewidth of 1, no dashing, miter segment joins
 * and square end caps.
 * <dt><i><code>Transform</code></i>
 * <dd>The 
 * {@link GraphicsConfiguration#getDefaultTransform() getDefaultTransform} 
 * for the <code>GraphicsConfiguration</code> of the <code>Component</code>.
 * <dt><i><code>Composite</code></i>
 * <dd>The {@link AlphaComposite#SRC_OVER} rule.
 * <dt><i><code>Clip</code></i>
 * <dd>No rendering <code>Clip</code>, the output is clipped to the
 * <code>Component</code>.
 * </dl>
 *
 * <h2>Rendering Compatibility Issues</h2>
 * The JDK(tm) 1.1 rendering model is based on a pixelization model 
 * that specifies that coordinates
 * are infinitely thin, lying between the pixels.  Drawing operations are 
 * performed using a one-pixel wide pen that fills the 
 * pixel below and to the right of the anchor point on the path.  
 * The JDK 1.1 rendering model is consistent with the 
 * capabilities of most of the existing class of platform 
 * renderers that need  to resolve integer coordinates to a 
 * discrete pen that must fall completely on a specified number of pixels.  
 * <p>
 * The Java 2D(tm) (Java(tm) 2 platform) API supports antialiasing renderers. 
 * A pen with a width of one pixel does not need to fall 
 * completely on pixel N as opposed to pixel N+1.  The pen can fall 
 * partially on both pixels. It is not necessary to choose a bias 
 * direction for a wide pen since the blending that occurs along the 
 * pen traversal edges makes the sub-pixel position of the pen 
 * visible to the user.  On the other hand, when antialiasing is 
 * turned off by setting the
 * {@link RenderingHints#KEY_ANTIALIASING KEY_ANTIALIASING} hint key
 * to the
 * {@link RenderingHints#VALUE_ANTIALIAS_OFF VALUE_ANTIALIAS_OFF} 
 * hint value, the renderer might need 
 * to apply a bias to determine which pixel to modify when the pen 
 * is straddling a pixel boundary, such as when it is drawn
 * along an integer coordinate in device space.  While the capabilities
 * of an antialiasing renderer make it no longer necessary for the
 * rendering model to specify a bias for the pen, it is desirable for the
 * antialiasing and non-antialiasing renderers to perform similarly for
 * the common cases of drawing one-pixel wide horizontal and vertical 
 * lines on the screen.  To ensure that turning on antialiasing by 
 * setting the 
 * {@link RenderingHints#KEY_ANTIALIASING KEY_ANTIALIASING} hint
 * key to
 * {@link RenderingHints#VALUE_ANTIALIAS_ON VALUE_ANTIALIAS_ON}
 * does not cause such lines to suddenly become twice as wide and half
 * as opaque, it is desirable to have the model specify a path for such
 * lines so that they completely cover a particular set of pixels to help
 * increase their crispness.
 * <p>
 * Java 2D API maintains compatibility with JDK 1.1 rendering 
 * behavior, such that legacy operations and existing renderer
 * behavior is unchanged under Java 2D API.  Legacy
 * methods that map onto general <code>draw</code> and 
 * <code>fill</code> methods are defined, which clearly indicates 
 * how <code>Graphics2D</code> extends <code>Graphics</code> based 
 * on settings of <code>Stroke</code> and <code>Transform</code>
 * attributes and rendering hints.  The definition 
 * performs identically under default attribute settings.  
 * For example, the default <code>Stroke</code> is a 
 * <code>BasicStroke</code> with a width of 1 and no dashing and the
 * default Transform for screen drawing is an Identity transform.  
 * <p>
 * The following two rules provide predictable rendering behavior whether
 * aliasing or antialiasing is being used.
 * <ul>
 * <li> Device coordinates are defined to be between device pixels which
 * avoids any inconsistent results between aliased and antaliased
 * rendering.  If coordinates were defined to be at a pixel's center, some
 * of the pixels covered by a shape, such as a rectangle, would only be
 * half covered.
 * With aliased rendering, the half covered pixels would either be 
 * rendered inside the shape or outside the shape.  With anti-aliased
 * rendering, the pixels on the entire edge of the shape would be half
 * covered.  On the other hand, since coordinates are defined to be
 * between pixels, a shape like a rectangle would have no half covered
 * pixels, whether or not it is rendered using antialiasing. 
 * <li> Lines and paths stroked using the <code>BasicStroke</code>
 * object may be "normalized" to provide consistent rendering of the
 * outlines when positioned at various points on the drawable and
 * whether drawn with aliased or antialiased rendering.  This
 * normalization process is controlled by the 
 * {@link RenderingHints#KEY_STROKE_CONTROL KEY_STROKE_CONTROL} hint.
 * The exact normalization algorithm is not specified, but the goals
 * of this normalization are to ensure that lines are rendered with
 * consistent visual appearance regardless of how they fall on the
 * pixel grid and to promote more solid horizontal and vertical
 * lines in antialiased mode so that they resemble their non-antialiased
 * counterparts more closely.  A typical normalization step might
 * promote antialiased line endpoints to pixel centers to reduce the
 * amount of blending or adjust the subpixel positioning of
 * non-antialiased lines so that the floating point line widths
 * round to even or odd pixel counts with equal likelihood.  This
 * process can move endpoints by up to half a pixel (usually towards
 * positive infinity along both axes) to promote these consistent
 * results.
 * </ul>
 * <p>
 * The following definitions of general legacy methods 
 * perform identically to previously specified behavior under default 
 * attribute settings:
 * <ul>
 * <li>
 * For <code>fill</code> operations, including <code>fillRect</code>, 
 * <code>fillRoundRect</code>, <code>fillOval</code>,
 * <code>fillArc</code>, <code>fillPolygon</code>, and 
 * <code>clearRect</code>, {@link #fill(Shape) fill} can now be called
 * with the desired <code>Shape</code>.  For example, when filling a
 * rectangle:
 * <pre>
 * fill(new Rectangle(x, y, w, h));
 * </pre>
 * is called.
 * <p>
 * <li>
 * Similarly, for draw operations, including <code>drawLine</code>, 
 * <code>drawRect</code>, <code>drawRoundRect</code>,
 * <code>drawOval</code>, <code>drawArc</code>, <code>drawPolyline</code>,
 * and <code>drawPolygon</code>, {@link #draw(Shape) draw} can now be
 * called with the desired <code>Shape</code>.  For example, when drawing a
 * rectangle:
 * <pre>
 * draw(new Rectangle(x, y, w, h));
 * </pre>
 * is called.
 * <p>
 * <li>
 * The <code>draw3DRect</code> and <code>fill3DRect</code> methods were
 * implemented in terms of the <code>drawLine</code> and 
 * <code>fillRect</code> methods in the <code>Graphics</code> class which
 * would predicate their behavior upon the current <code>Stroke</code>
 * and <code>Paint</code> objects in a <code>Graphics2D</code> context.
 * This class overrides those implementations with versions that use
 * the current <code>Color</code> exclusively, overriding the current
 * <code>Paint</code> and which uses <code>fillRect</code> to describe
 * the exact same behavior as the preexisting methods regardless of the
 * setting of the current <code>Stroke</code>.
 * </ul>
 * The <code>Graphics</code> class defines only the <code>setColor</code>
 * method to control the color to be painted.  Since the Java 2D API extends
 * the <code>Color</code> object to implement the new <code>Paint</code> 
 * interface, the existing
 * <code>setColor</code> method is now a convenience method for setting the 
 * current <code>Paint</code> attribute to a <code>Color</code> object.  
 * <code>setColor(c)</code> is equivalent to <code>setPaint(c)</code>.
 * <p>
 * The <code>Graphics</code> class defines two methods for controlling
 * how colors are applied to the destination.
 * <ol>
 * <li>
 * The <code>setPaintMode</code> method is implemented as a convenience
 * method to set the default <code>Composite</code>, equivalent to
 * <code>setComposite(new AlphaComposite.SrcOver)</code>.
 * <li>
 * The <code>setXORMode(Color xorcolor)</code> method is implemented
 * as a convenience method to set a special <code>Composite</code> object that
 * ignores the <code>Alpha</code> components of source colors and sets the
 * destination color to the value:
 * <pre>
 * dstpixel = (PixelOf(srccolor) ^ PixelOf(xorcolor) ^ dstpixel);
 * </pre>
 * </ol>
 *
 * @version 	1.84, 11/17/05
 * @author Jim Graham
 * @see java.awt.RenderingHints
 */
public abstract class Graphics2D extends Graphics {

    /**
     * Constructs a new <code>Graphics2D</code> object.  Since 
     * <code>Graphics2D</code> is an abstract class, and since it must be
     * customized by subclasses for different output devices,
     * <code>Graphics2D</code> objects cannot be created directly.
     * Instead, <code>Graphics2D</code> objects must be obtained from another 
     * <code>Graphics2D</code> object, created by a 
     * <code>Component</code>, or obtained from images such as
     * {@link BufferedImage} objects.
     * @see java.awt.Component#getGraphics
     * @see java.awt.Graphics#create
     */
    protected Graphics2D() {
    }

    /**
     * Draws a 3-D highlighted outline of the specified rectangle.
     * The edges of the rectangle are highlighted so that they
     * appear to be beveled and lit from the upper left corner.
     * <p>
     * The colors used for the highlighting effect are determined 
     * based on the current color.
     * The resulting rectangle covers an area that is 
     * <code>width&nbsp;+&nbsp;1</code> pixels wide
     * by <code>height&nbsp;+&nbsp;1</code> pixels tall.  This method
     * uses the current <code>Color</code> exclusively and ignores
     * the current <code>Paint</code>.
     * @param x the x coordinate of the rectangle to be drawn.
     * @param y the y coordinate of the rectangle to be drawn.
     * @param width the width of the rectangle to be drawn.
     * @param height the height of the rectangle to be drawn.
     * @param raised a boolean that determines whether the rectangle
     *                      appears to be raised above the surface 
     *                      or sunk into the surface.
     * @see         java.awt.Graphics#fill3DRect
     */
    public void draw3DRect(int x, int y, int width, int height,
			   boolean raised) {
	Paint p = getPaint();
	Color c = getColor();
	Color brighter = c.brighter();
	Color darker = c.darker();

	setColor(raised ? brighter : darker);
	//drawLine(x, y, x, y + height);
	fillRect(x, y, 1, height + 1);
	//drawLine(x + 1, y, x + width - 1, y);
	fillRect(x + 1, y, width - 1, 1);
	setColor(raised ? darker : brighter);
	//drawLine(x + 1, y + height, x + width, y + height);
	fillRect(x + 1, y + height, width, 1);
	//drawLine(x + width, y, x + width, y + height - 1);
	fillRect(x + width, y, 1, height);
	setPaint(p);
    }    

    /**
     * Paints a 3-D highlighted rectangle filled with the current color.
     * The edges of the rectangle are highlighted so that it appears
     * as if the edges were beveled and lit from the upper left corner.
     * The colors used for the highlighting effect and for filling are
     * determined from the current <code>Color</code>.  This method uses
     * the current <code>Color</code> exclusively and ignores the current 
     * <code>Paint</code>.
     * @param x the x coordinate of the rectangle to be filled.
     * @param y the y coordinate of the rectangle to be filled.
     * @param       width the width of the rectangle to be filled.
     * @param       height the height of the rectangle to be filled.
     * @param       raised a boolean value that determines whether the 
     *                      rectangle appears to be raised above the surface 
     *                      or etched into the surface.
     * @see         java.awt.Graphics#draw3DRect
     */
    public void fill3DRect(int x, int y, int width, int height,
			   boolean raised) {
	Paint p = getPaint();
	Color c = getColor();
	Color brighter = c.brighter();
	Color darker = c.darker();

	if (!raised) {
	    setColor(darker);
	} else if (p != c) {
	    setColor(c);
	}
	fillRect(x+1, y+1, width-2, height-2);
	setColor(raised ? brighter : darker);
	//drawLine(x, y, x, y + height - 1);
	fillRect(x, y, 1, height);
	//drawLine(x + 1, y, x + width - 2, y);
	fillRect(x + 1, y, width - 2, 1);
	setColor(raised ? darker : brighter);
	//drawLine(x + 1, y + height - 1, x + width - 1, y + height - 1);
	fillRect(x + 1, y + height - 1, width - 1, 1);
	//drawLine(x + width - 1, y, x + width - 1, y + height - 2);
	fillRect(x + width - 1, y, 1, height - 1);
	setPaint(p);
    }    

    /**
     * Strokes the outline of a <code>Shape</code> using the settings of the 
     * current <code>Graphics2D</code> context.  The rendering attributes
     * applied include the <code>Clip</code>, <code>Transform</code>,
     * <code>Paint</code>, <code>Composite</code> and 
     * <code>Stroke</code> attributes.
     * @param s the <code>Shape</code> to be rendered
     * @see #setStroke
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     * @see #transform
     * @see #setTransform     
     * @see #clip
     * @see #setClip
     * @see #setComposite    
     */
    public abstract void draw(Shape s);

    /**
     * Renders an image, applying a transform from image space into user space
     * before drawing.
     * The transformation from user space into device space is done with
     * the current <code>Transform</code> in the <code>Graphics2D</code>.
     * The specified transformation is applied to the image before the
     * transform attribute in the <code>Graphics2D</code> context is applied.
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>, and <code>Composite</code> attributes. 
     * Note that no rendering is done if the specified transform is 
     * noninvertible.
     * @param img the specified image to be rendered. 
     *            This method does nothing if <code>img</code> is null.
     * @param xform the transformation from image space into user space
     * @param obs the {@link ImageObserver}
     * to be notified as more of the <code>Image</code>
     * is converted
     * @return <code>true</code> if the <code>Image</code> is 
     * fully loaded and completely rendered, or if it's null;
     * <code>false</code> if the <code>Image</code> is still being loaded.
     * @see #transform
     * @see #setTransform
     * @see #setComposite
     * @see #clip
     * @see #setClip
     */
    public abstract boolean drawImage(Image img,
                                      AffineTransform xform,
                                      ImageObserver obs);

    /**
     * Renders a <code>BufferedImage</code> that is
     * filtered with a 
     * {@link BufferedImageOp}.
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>
     * and <code>Composite</code> attributes.  This is equivalent to:
     * <pre>
     * img1 = op.filter(img, null);
     * drawImage(img1, new AffineTransform(1f,0f,0f,1f,x,y), null);
     * </pre>
     * @param op the filter to be applied to the image before rendering
     * @param img the specified <code>BufferedImage</code> to be rendered. 
     *            This method does nothing if <code>img</code> is null.
     * @param x the x coordinate of the location in user space where
     * the upper left corner of the image is rendered
     * @param y the y coordinate of the location in user space where
     * the upper left corner of the image is rendered
     *
     * @see #transform
     * @see #setTransform
     * @see #setComposite
     * @see #clip
     * @see #setClip
     */
    public abstract void drawImage(BufferedImage img,
				   BufferedImageOp op,
				   int x,
				   int y);

    /**
     * Renders a {@link RenderedImage},
     * applying a transform from image 
     * space into user space before drawing.
     * The transformation from user space into device space is done with
     * the current <code>Transform</code> in the <code>Graphics2D</code>.
     * The specified transformation is applied to the image before the
     * transform attribute in the <code>Graphics2D</code> context is applied.
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>, and <code>Composite</code> attributes. Note
     * that no rendering is done if the specified transform is
     * noninvertible.
     * @param img the image to be rendered. This method does
     *            nothing if <code>img</code> is null.
     * @param xform the transformation from image space into user space
     * @see #transform
     * @see #setTransform
     * @see #setComposite
     * @see #clip
     * @see #setClip
     */
    public abstract void drawRenderedImage(RenderedImage img,
                                           AffineTransform xform);

    /**
     * Renders a 
     * {@link RenderableImage},
     * applying a transform from image space into user space before drawing.
     * The transformation from user space into device space is done with
     * the current <code>Transform</code> in the <code>Graphics2D</code>.
     * The specified transformation is applied to the image before the
     * transform attribute in the <code>Graphics2D</code> context is applied.
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>, and <code>Composite</code> attributes. Note
     * that no rendering is done if the specified transform is
     * noninvertible.
     *<p> 
     * Rendering hints set on the <code>Graphics2D</code> object might
     * be used in rendering the <code>RenderableImage</code>.  
     * If explicit control is required over specific hints recognized by a 
     * specific <code>RenderableImage</code>, or if knowledge of which hints 
     * are used is required, then a <code>RenderedImage</code> should be   
     * obtained directly from the <code>RenderableImage</code>
     * and rendered using 
     *{@link #drawRenderedImage(RenderedImage, AffineTransform) drawRenderedImage}.
     * @param img the image to be rendered. This method does
     *            nothing if <code>img</code> is null.
     * @param xform the transformation from image space into user space
     * @see #transform
     * @see #setTransform
     * @see #setComposite
     * @see #clip
     * @see #setClip
     * @see #drawRenderedImage
     */
    public abstract void drawRenderableImage(RenderableImage img,
                                             AffineTransform xform);

    /** 
     * Renders the text of the specified <code>String</code>, using the 
     * current text attribute state in the <code>Graphics2D</code> context. 
     * The baseline of the 
     * first character is at position (<i>x</i>,&nbsp;<i>y</i>) in 
     * the User Space. 
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>, <code>Paint</code>, <code>Font</code> and
     * <code>Composite</code> attributes.  For characters in script 
     * systems such as Hebrew and Arabic, the glyphs can be rendered from
     * right to left, in which case the coordinate supplied is the
     * location of the leftmost character on the baseline.
     * @param str the string to be rendered
     * @param x the x coordinate of the location where the
     * <code>String</code> should be rendered
     * @param y the y coordinate of the location where the
     * <code>String</code> should be rendered
     * @throws NullPointerException if <code>str</code> is 
     *         <code>null</code>
     * @see         java.awt.Graphics#drawBytes
     * @see         java.awt.Graphics#drawChars
     * @since       JDK1.0
     */
    public abstract void drawString(String str, int x, int y);

    /**
     * Renders the text specified by the specified <code>String</code>, 
     * using the current text attribute state in the <code>Graphics2D</code> context. 
     * The baseline of the first character is at position 
     * (<i>x</i>,&nbsp;<i>y</i>) in the User Space.
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>, <code>Paint</code>, <code>Font</code> and
     * <code>Composite</code> attributes. For characters in script systems 
     * such as Hebrew and Arabic, the glyphs can be rendered from right to
     * left, in which case the coordinate supplied is the location of the
     * leftmost character on the baseline.
     * @param str the <code>String</code> to be rendered
     * @param x the x coordinate of the location where the
     * <code>String</code> should be rendered
     * @param y the y coordinate of the location where the
     * <code>String</code> should be rendered
     * @throws NullPointerException if <code>str</code> is
     *         <code>null</code>
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     * @see java.awt.Graphics#setFont
     * @see #setTransform
     * @see #setComposite
     * @see #setClip
     */
    public abstract void drawString(String str, float x, float y);

    /**
     * Renders the text of the specified iterator applying its attributes
     * in accordance with the specification of the {@link TextAttribute} class.
     * <p>
     * The baseline of the first character is at position
     * (<i>x</i>,&nbsp;<i>y</i>) in User Space.
     * For characters in script systems such as Hebrew and Arabic,
     * the glyphs can be rendered from right to left, in which case the 
     * coordinate supplied is the location of the leftmost character
     * on the baseline.
     * @param iterator the iterator whose text is to be rendered
     * @param x the x coordinate where the iterator's text is to be
     * rendered
     * @param y the y coordinate where the iterator's text is to be
     * rendered
     * @throws NullPointerException if <code>iterator</code> is
     *         <code>null</code>
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     * @see #setTransform
     * @see #setComposite
     * @see #setClip
     */
    public abstract void drawString(AttributedCharacterIterator iterator,
                                    int x, int y);

    /**
     * Renders the text of the specified iterator applying its attributes
     * in accordance with the specification of the {@link TextAttribute} class.
     * <p>
     * The baseline of the first character is at position
     * (<i>x</i>,&nbsp;<i>y</i>) in User Space.
     * For characters in script systems such as Hebrew and Arabic,
     * the glyphs can be rendered from right to left, in which case the 
     * coordinate supplied is the location of the leftmost character
     * on the baseline.
     * @param iterator the iterator whose text is to be rendered
     * @param x the x coordinate where the iterator's text is to be
     * rendered
     * @param y the y coordinate where the iterator's text is to be
     * rendered
     * @throws NullPointerException if <code>iterator</code> is
     *         <code>null</code>
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     * @see #setTransform
     * @see #setComposite
     * @see #setClip
     */
    public abstract void drawString(AttributedCharacterIterator iterator,
                                    float x, float y);

    /**
     * Renders the text of the specified 
     * {@link GlyphVector} using
     * the <code>Graphics2D</code> context's rendering attributes.
     * The rendering attributes applied include the <code>Clip</code>,
     * <code>Transform</code>, <code>Paint</code>, and
     * <code>Composite</code> attributes.  The <code>GlyphVector</code>
     * specifies individual glyphs from a {@link Font}.
     * The <code>GlyphVector</code> can also contain the glyph positions.  
     * This is the fastest way to render a set of characters to the
     * screen.
     * @param g the <code>GlyphVector</code> to be rendered
     * @param x the x position in User Space where the glyphs should
     * be rendered
     * @param y the y position in User Space where the glyphs should
     * be rendered
     * @throws NullPointerException if <code>g</code> is <code>null</code>.
     *
     * @see java.awt.Font#createGlyphVector
     * @see java.awt.font.GlyphVector
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     * @see #setTransform
     * @see #setComposite
     * @see #setClip
     */
    public abstract void drawGlyphVector(GlyphVector g, float x, float y);

    /**
     * Fills the interior of a <code>Shape</code> using the settings of the   
     * <code>Graphics2D</code> context. The rendering attributes applied 
     * include the <code>Clip</code>, <code>Transform</code>,
     * <code>Paint</code>, and <code>Composite</code>.
     * @param s the <code>Shape</code> to be filled
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     * @see #transform
     * @see #setTransform
     * @see #setComposite
     * @see #clip
     * @see #setClip
     */
    public abstract void fill(Shape s);

    /**
     * Checks whether or not the specified <code>Shape</code> intersects 
     * the specified {@link Rectangle}, which is in device
     * space. If <code>onStroke</code> is false, this method checks
     * whether or not the interior of the specified <code>Shape</code>
     * intersects the specified <code>Rectangle</code>.  If 
     * <code>onStroke</code> is <code>true</code>, this method checks
     * whether or not the <code>Stroke</code> of the specified 
     * <code>Shape</code> outline intersects the specified
     * <code>Rectangle</code>.
     * The rendering attributes taken into account include the
     * <code>Clip</code>, <code>Transform</code>, and <code>Stroke</code> 
     * attributes.
     * @param rect the area in device space to check for a hit
     * @param s the <code>Shape</code> to check for a hit
     * @param onStroke flag used to choose between testing the 
     * stroked or the filled shape.  If the flag is <code>true</code>, the 
     * <code>Stroke</code> oultine is tested.  If the flag is 
     * <code>false</code>, the filled <code>Shape</code> is tested.
     * @return <code>true</code> if there is a hit; <code>false</code> 
     * otherwise.
     * @see #setStroke
     * @see #fill
     * @see #draw
     * @see #transform
     * @see #setTransform
     * @see #clip
     * @see #setClip
     */
    public abstract boolean hit(Rectangle rect,
				Shape s,
				boolean onStroke);

    /**
     * Returns the device configuration associated with this 
     * <code>Graphics2D</code>.
     * @return the device configuration of this <code>Graphics2D</code>.
     */
    public abstract GraphicsConfiguration getDeviceConfiguration();

    /**
     * Sets the <code>Composite</code> for the <code>Graphics2D</code> context.
     * The <code>Composite</code> is used in all drawing methods such as 
     * <code>drawImage</code>, <code>drawString</code>, <code>draw</code>,
     * and <code>fill</code>.  It specifies how new pixels are to be combined 
     * with the existing pixels on the graphics device during the rendering 
     * process.
     * <p>If this <code>Graphics2D</code> context is drawing to a
     * <code>Component</code> on the display screen and the
     * <code>Composite</code> is a custom object rather than an
     * instance of the <code>AlphaComposite</code> class, and if
     * there is a security manager, its <code>checkPermission</code>
     * method is called with an <code>AWTPermission("readDisplayPixels")</code>
     * permission.
     * @throws SecurityException
     *         if a custom <code>Composite</code> object is being
     *         used to render to the screen and a security manager
     *         is set and its <code>checkPermission</code> method
     *         does not allow the operation.
     * @param comp the <code>Composite</code> object to be used for rendering
     * @see java.awt.Graphics#setXORMode
     * @see java.awt.Graphics#setPaintMode
     * @see #getComposite
     * @see AlphaComposite
     * @see SecurityManager#checkPermission
     * @see java.awt.AWTPermission
     */
    public abstract void setComposite(Composite comp);

    /**
     * Sets the <code>Paint</code> attribute for the 
     * <code>Graphics2D</code> context.  Calling this method
     * with a <code>null</code> <code>Paint</code> object does 
     * not have any effect on the current <code>Paint</code> attribute
     * of this <code>Graphics2D</code>.  
     * @param paint the <code>Paint</code> object to be used to generate 
     * color during the rendering process, or <code>null</code>
     * @see java.awt.Graphics#setColor
     * @see #getPaint
     * @see GradientPaint
     * @see TexturePaint
     */
    public abstract void setPaint( Paint paint );

    /**
     * Sets the <code>Stroke</code> for the <code>Graphics2D</code> context.
     * @param s the <code>Stroke</code> object to be used to stroke a 
     * <code>Shape</code> during the rendering process
     * @see BasicStroke
     * @see #getStroke
     */
    public abstract void setStroke(Stroke s);

    /**
     * Sets the value of a single preference for the rendering algorithms.
     * Hint categories include controls for rendering quality and overall 
     * time/quality trade-off in the rendering process.  Refer to the
     * <code>RenderingHints</code> class for definitions of some common
     * keys and values.
     * @param hintKey the key of the hint to be set.
     * @param hintValue the value indicating preferences for the specified
     * hint category.
     * @see #getRenderingHint(RenderingHints.Key)
     * @see RenderingHints
     */
    public abstract void setRenderingHint(Key hintKey, Object hintValue);

    /**
     * Returns the value of a single preference for the rendering algorithms.
     * Hint categories include controls for rendering quality and overall 
     * time/quality trade-off in the rendering process.  Refer to the
     * <code>RenderingHints</code> class for definitions of some common
     * keys and values.
     * @param hintKey the key corresponding to the hint to get. 
     * @return an object representing the value for the specified hint key.
     * Some of the keys and their associated values are defined in the
     * <code>RenderingHints</code> class.
     * @see RenderingHints
     * @see #setRenderingHint(RenderingHints.Key, Object)
     */
    public abstract Object getRenderingHint(Key hintKey);

    /**
     * Replaces the values of all preferences for the rendering
     * algorithms with the specified <code>hints</code>.
     * The existing values for all rendering hints are discarded and
     * the new set of known hints and values are initialized from the
     * specified {@link Map} object.
     * Hint categories include controls for rendering quality and
     * overall time/quality trade-off in the rendering process.
     * Refer to the <code>RenderingHints</code> class for definitions of
     * some common keys and values.
     * @param hints the rendering hints to be set
     * @see #getRenderingHints
     * @see RenderingHints
     */
    public abstract void setRenderingHints(Map<?,?> hints);

    /**
     * Sets the values of an arbitrary number of preferences for the
     * rendering algorithms.
     * Only values for the rendering hints that are present in the
     * specified <code>Map</code> object are modified.
     * All other preferences not present in the specified 
     * object are left unmodified.
     * Hint categories include controls for rendering quality and
     * overall time/quality trade-off in the rendering process.
     * Refer to the <code>RenderingHints</code> class for definitions of
     * some common keys and values.
     * @param hints the rendering hints to be set
     * @see RenderingHints
     */
    public abstract void addRenderingHints(Map<?,?> hints);

    /**
     * Gets the preferences for the rendering algorithms.  Hint categories
     * include controls for rendering quality and overall time/quality
     * trade-off in the rendering process.
     * Returns all of the hint key/value pairs that were ever specified in 
     * one operation.  Refer to the
     * <code>RenderingHints</code> class for definitions of some common
     * keys and values.
     * @return a reference to an instance of <code>RenderingHints</code>
     * that contains the current preferences.
     * @see RenderingHints
     * @see #setRenderingHints(Map)
     */
    public abstract RenderingHints getRenderingHints();

    /**
     * Translates the origin of the <code>Graphics2D</code> context to the 
     * point (<i>x</i>,&nbsp;<i>y</i>) in the current coordinate system. 
     * Modifies the <code>Graphics2D</code> context so that its new origin 
     * corresponds to the point (<i>x</i>,&nbsp;<i>y</i>) in the 
     * <code>Graphics2D</code> context's former coordinate system.  All 
     * coordinates used in subsequent rendering operations on this graphics 
     * context are relative to this new origin.
     * @param  x the specified x coordinate
     * @param  y the specified y coordinate
     * @since   JDK1.0
     */
    public abstract void translate(int x, int y);

    /**
     * Concatenates the current
     * <code>Graphics2D</code> <code>Transform</code> 
     * with a translation transform. 
     * Subsequent rendering is translated by the specified
     * distance relative to the previous position.
     * This is equivalent to calling transform(T), where T is an
     * <code>AffineTransform</code> represented by the following matrix:
     * <pre>
     *		[   1    0    tx  ]
     *		[   0    1    ty  ]
     *		[   0    0    1   ]
     * </pre>
     * @param tx the distance to translate along the x-axis
     * @param ty the distance to translate along the y-axis
     */
    public abstract void translate(double tx, double ty);

    /**
     * Concatenates the current <code>Graphics2D</code>
     * <code>Transform</code> with a rotation transform. 
     * Subsequent rendering is rotated by the specified radians relative
     * to the previous origin.
     * This is equivalent to calling <code>transform(R)</code>, where R is an
     * <code>AffineTransform</code> represented by the following matrix:
     * <pre>
     *		[   cos(theta)    -sin(theta)    0   ]
     *		[   sin(theta)     cos(theta)    0   ]
     *		[       0              0         1   ]
     * </pre>
     * Rotating with a positive angle theta rotates points on the positive
     * x axis toward the positive y axis.
     * @param theta the angle of rotation in radians
     */
    public abstract void rotate(double theta);

    /**
     * Concatenates the current <code>Graphics2D</code> 
     * <code>Transform</code> with a translated rotation 
     * transform.  Subsequent rendering is transformed by a transform
     * which is constructed by translating to the specified location, 
     * rotating by the specified radians, and translating back by the same
     * amount as the original translation.  This is equivalent to the
     * following sequence of calls:
     * <pre>
     *		translate(x, y);
     *		rotate(theta);
     *		translate(-x, -y);
     * </pre>
     * Rotating with a positive angle theta rotates points on the positive
     * x axis toward the positive y axis.
     * @param theta the angle of rotation in radians
     * @param x the x coordinate of the origin of the rotation
     * @param y the y coordinate of the origin of the rotation
     */
    public abstract void rotate(double theta, double x, double y);

    /**
     * Concatenates the current <code>Graphics2D</code>
     * <code>Transform</code> with a scaling transformation 
     * Subsequent rendering is resized according to the specified scaling
     * factors relative to the previous scaling.
     * This is equivalent to calling <code>transform(S)</code>, where S is an
     * <code>AffineTransform</code> represented by the following matrix:
     * <pre>
     *		[   sx   0    0   ]
     *		[   0    sy   0   ]
     *		[   0    0    1   ]
     * </pre>
     * @param sx the amount by which X coordinates in subsequent
     * rendering operations are multiplied relative to previous
     * rendering operations.
     * @param sy the amount by which Y coordinates in subsequent 
     * rendering operations are multiplied relative to previous 
     * rendering operations.
     */
    public abstract void scale(double sx, double sy);

    /**
     * Concatenates the current <code>Graphics2D</code>
     * <code>Transform</code> with a shearing transform. 
     * Subsequent renderings are sheared by the specified
     * multiplier relative to the previous position.
     * This is equivalent to calling <code>transform(SH)</code>, where SH
     * is an <code>AffineTransform</code> represented by the following
     * matrix:
     * <pre>
     *		[   1   shx   0   ]
     *		[  shy   1    0   ]
     *		[   0    0    1   ]
     * </pre>
     * @param shx the multiplier by which coordinates are shifted in 
     * the positive X axis direction as a function of their Y coordinate
     * @param shy the multiplier by which coordinates are shifted in
     * the positive Y axis direction as a function of their X coordinate
     */
    public abstract void shear(double shx, double shy);

    /**
     * Composes an <code>AffineTransform</code> object with the 
     * <code>Transform</code> in this <code>Graphics2D</code> according 
     * to the rule last-specified-first-applied.  If the current
     * <code>Transform</code> is Cx, the result of composition
     * with Tx is a new <code>Transform</code> Cx'.  Cx' becomes the
     * current <code>Transform</code> for this <code>Graphics2D</code>.
     * Transforming a point p by the updated <code>Transform</code> Cx' is
     * equivalent to first transforming p by Tx and then transforming
     * the result by the original <code>Transform</code> Cx.  In other
     * words, Cx'(p) = Cx(Tx(p)).  A copy of the Tx is made, if necessary,
     * so further modifications to Tx do not affect rendering.
     * @param Tx the <code>AffineTransform</code> object to be composed with 
     * the current <code>Transform</code>
     * @see #setTransform
     * @see AffineTransform
     */
    public abstract void transform(AffineTransform Tx);

    /**
     * Overwrites the Transform in the <code>Graphics2D</code> context.
     * WARNING: This method should <b>never</b> be used to apply a new
     * coordinate transform on top of an existing transform because the 
     * <code>Graphics2D</code> might already have a transform that is
     * needed for other purposes, such as rendering Swing 
     * components or applying a scaling transformation to adjust for the
     * resolution of a printer.  
     * <p>To add a coordinate transform, use the 
     * <code>transform</code>, <code>rotate</code>, <code>scale</code>,
     * or <code>shear</code> methods.  The <code>setTransform</code> 
     * method is intended only for restoring the original 
     * <code>Graphics2D</code> transform after rendering, as shown in this
     * example:
     * <pre><blockquote>
     * // Get the current transform
     * AffineTransform saveAT = g2.getTransform();
     * // Perform transformation
     * g2d.transform(...);
     * // Render
     * g2d.draw(...);
     * // Restore original transform
     * g2d.setTransform(saveAT);
     * </blockquote></pre>
     *
     * @param Tx the <code>AffineTransform</code> that was retrieved
     *           from the <code>getTransform</code> method
     * @see #transform
     * @see #getTransform
     * @see AffineTransform
     */
    public abstract void setTransform(AffineTransform Tx);

    /**
     * Returns a copy of the current <code>Transform</code> in the 
     * <code>Graphics2D</code> context.
     * @return the current <code>AffineTransform</code> in the 
     *             <code>Graphics2D</code> context.
     * @see #transform
     * @see #setTransform
     */
    public abstract AffineTransform getTransform();

    /**
     * Returns the current <code>Paint</code> of the 
     * <code>Graphics2D</code> context.
     * @return the current <code>Graphics2D</code> <code>Paint</code>,
     * which defines a color or pattern.
     * @see #setPaint
     * @see java.awt.Graphics#setColor
     */
    public abstract Paint getPaint();

    /**
     * Returns the current <code>Composite</code> in the
     * <code>Graphics2D</code> context.
     * @return the current <code>Graphics2D</code> <code>Composite</code>,
     *              which defines a compositing style.
     * @see #setComposite
     */
    public abstract Composite getComposite();

    /**
     * Sets the background color for the <code>Graphics2D</code> context. 
     * The background color is used for clearing a region.
     * When a <code>Graphics2D</code> is constructed for a
     * <code>Component</code>, the background color is
     * inherited from the <code>Component</code>. Setting the background color 
     * in the <code>Graphics2D</code> context only affects the subsequent      
     * <code>clearRect</code> calls and not the background color of the  
     * <code>Component</code>.  To change the background
     * of the <code>Component</code>, use appropriate methods of 
     * the <code>Component</code>.
     * @param color the background color that isused in
     * subsequent calls to <code>clearRect</code>
     * @see #getBackground
     * @see java.awt.Graphics#clearRect
     */
    public abstract void setBackground(Color color);

    /**
     * Returns the background color used for clearing a region.
     * @return the current <code>Graphics2D</code> <code>Color</code>,
     * which defines the background color.
     * @see #setBackground
     */
    public abstract Color getBackground();

    /**
     * Returns the current <code>Stroke</code> in the
     * <code>Graphics2D</code> context.
     * @return the current <code>Graphics2D</code> <code>Stroke</code>,
     *                 which defines the line style.
     * @see #setStroke
     */
    public abstract Stroke getStroke();

    /**
     * Intersects the current <code>Clip</code> with the interior of the
     * specified <code>Shape</code> and sets the <code>Clip</code> to the
     * resulting intersection.  The specified <code>Shape</code> is
     * transformed with the current <code>Graphics2D</code>
     * <code>Transform</code> before being intersected with the current 
     * <code>Clip</code>.  This method is used to make the current
     * <code>Clip</code> smaller.
     * To make the <code>Clip</code> larger, use <code>setClip</code>.
     * The <i>user clip</i> modified by this method is independent of the
     * clipping associated with device bounds and visibility.  If no clip has 
     * previously been set, or if the clip has been cleared using 
     * {@link Graphics#setClip(Shape) setClip} with a <code>null</code>
     * argument, the specified <code>Shape</code> becomes the new 
     * user clip.
     * @param s the <code>Shape</code> to be intersected with the current
     *          <code>Clip</code>.  If <code>s</code> is <code>null</code>,
     *          this method clears the current <code>Clip</code>.
     */
     public abstract void clip(Shape s);

     /**
     * Get the rendering context of the <code>Font</code> within this 
     * <code>Graphics2D</code> context.
     * The {@link FontRenderContext}
     * encapsulates application hints such as anti-aliasing and 
     * fractional metrics, as well as target device specific information
     * such as dots-per-inch.  This information should be provided by the
     * application when using objects that perform typographical
     * formatting, such as <code>Font</code> and
     * <code>TextLayout</code>.  This information should also be provided
     * by applications that perform their own layout and need accurate
     * measurements of various characteristics of glyphs such as advance
     * and line height when various rendering hints have been applied to
     * the text rendering.
     *
     * @return a reference to an instance of FontRenderContext.
     * @see java.awt.font.FontRenderContext
     * @see java.awt.Font#createGlyphVector
     * @see java.awt.font.TextLayout
     * @since     1.2
     */

    public abstract FontRenderContext getFontRenderContext();

}